RoscoLED Tape
RoscoLED Tape
Professional-grade LED tape built for architecture and broadcast — high colour accuracy, real durability, and a proper power and control ecosystem behind it. Static white, tunable white or full colour. Here are the outputs, the lines and the numbers.
Tape you can actually specify
RoscoLED Tape is a flexible 24 V LED strip engineered for professional work: CRI 93 / TLCI 92 colour accuracy, an L70 rating past 47,000 hours, and plug-and-play 5 m reels that run from dedicated Rosco power and control boxes. It is the difference between architectural-grade tape and the anonymous strip that fades in a year.
It comes as fixed static white, tunable white, or full colour-mixing — and drops into aluminium profiles for heat management and beam control. Coves, reveals, edges and niches, lit cleanly and built to last.
Three engines, one system
All run at 24 V from Rosco control boxes; pick the line for the colour behaviour.
Static White
Fixed white in 1800, 2400, 3000 or 5600K — the efficient, high-CRI workhorse for coves and edges.
VariWhite
Tunable white 3000–6000K (Ultra reaches 1800–6000K) — warm-to-cool on cue.
VariColor
Full colour mixing — RGB+White (warm or cool) or RGBA — for dynamic and branded schemes.
Compare the tape at a glance
Every white line runs CRI 93 / TLCI 92. Figures are per metre at 24 V.
| Line | Output | Power | Colour / CCT | Cut point |
|---|---|---|---|---|
| Static White | 1,000 lm/m | 14.4 W/m | 1800–5600 K | 100 mm |
| VariWhite | 1,500 lm/m | 19 W/m | 3000–6000 K tunable | 100 mm |
| VariWhite Ultra | 1,400 lm/m | 19 W/m | 1800–6000 K tunable | 100 mm |
| VariColor RGB+W | 1,440 lm/m | 23 W/m | RGB + 3000 / 6000 K | 125 mm |
| VariColor RGBA | 1,250 lm/m | 38.4 W/m | Red / Green / Blue / Amber | 100 mm |
Efficacy works out around 69–79 lm/W for the white lines. IP43 is standard; IP65 is available to order (VariColor RGBA is IP43 only). Tape width is confirmed at specification.
The hard numbers
Published Rosco figures. Tape width is the one item Rosco does not publish — confirmed at specification.
CRI 93 / TLCI 92 across all white lines
24 V DC (12 V DC for Strips & Tiles)
Every 100 mm (125 mm for VariColor RGB+W)
Minimum 38 mm (1.5″)
IP43 standard · IP65 to order · 12 V strips IP67
VHB / TESA backing, single-use
L70 beyond 47,000 hr (LM-80)
3 years (24 V tape) · 1 year (12 V strips & tiles)
Max 5 m per feed, home-run to the control box
UL Listed · CE
Power, control & profiles
Control boxes
- Static White 300 W
- VariWhite 400 W
- VariColor 400 W
- DMX in / out
Power supplies
- 120–600 W
- IP20 & IP67
- Desktop 120 W
- Rugged IP67 outdoor
Dimming & DMX
- PWM DMX decoders (5×8A, 12×5A)
- EldoLED 720D (DALI / 0–10V)
- 2- & 4-ch RF remotes
Profiles & optics
- 9 aluminium channel profiles
- Flush / rectangular / square / corner
- 30° & 60° lenses
- Frosted or clear diffuser
Colour woven into the architecture
At First Marion Baptist Church in Arkansas, RoscoLED Tape is built into niches and coves to wash the sanctuary in controllable colour and white — light integrated into the surfaces, not hung from them.
It is what professional tape is for: hidden, even, colour-accurate, and rated to keep performing for years.
Sample the light before you spec the run
Tape is easy to judge from a short sample — the colour, the CRI, the density of the light in a profile. We can get a RoscoLED Tape sample and profile to you to test against your own detail and finish.
We supply the sample for you to trial, then help you size the power, control and profile once you have seen it. We put a length in your hands rather than testing it for you.
Planning a cove, reveal or colour run?
You have the lines, the outputs and the control ecosystem. If it fits — or you want a sample — we'll confirm the spec and supply it in Australia.