Rosco Premier Clear – Satin (High Durability Scenic Clear Coat) 6820
Rosco Premier Clear – Satin (High Durability Scenic Clear Coat) 6820
Share
We’re currently taking enquiries for this product in New Zealand — please leave your details and we’ll assist with your order. Pricing shown is indicative only.
Rosco Premier Clear Satin is a professional high-performance acrylic clear coat designed to provide increased durability and protection for scenic finishes while producing a balanced satin sheen.
The satin finish sits between gloss and flat, making it ideal when you want a protective clear coat that enhances colour depth without creating strong reflections.
- Higher durability than standard scenic clear coats
- Satin sheen reduces glare while maintaining colour depth
- UV stabilised formulation designed to help resist yellowing
- Protects murals, scenic artwork and installations
- Suitable for both indoor and outdoor scenic applications
Important Performance Notes
Rosco Premiere Clear provides a highly durable urethane finish perfect for sealing floors in entertainment and live event venues as well as withstanding light or moderate commercial traffic.
A floor coat is ready for light use after approximately 12 hours, however allow approximately 24 hours for full cure.
Rosco Premiere Clear is suitable for exterior use in semi-protected environments. Long term exposure to direct sunlight is not recommended.
Coverage Guide
Coverage will vary depending on surface porosity and application thickness.
| Container Size | Coverage (Imperial) | Coverage (Metric) |
|---|---|---|
| 1 Gallon (3.79L) | Approx. 450 sq ft | Approx. 42 m² |
| 1 Quart (0.95L) | Approx. 112 sq ft | Approx. 10.5 m² |
Application Methods
Rosco Premiere Clear may be applied by brush, short nap roller, or spray.
- Stir product before and occasionally during application. DO NOT SHAKE.
- Apply in thin coats.
- When rolling, use a roller cover with 1/4" or thinner nap for best results.
- For spray applications, thin Premiere Clear up to 20% with clean water.
- Spray on in thin, uniform coats.
- Avoid excessive film build up in recessed areas or yellowing may occur.
- If Premiere Clear is applied in excessively thick coats, or under conditions of extremely high humidity, the film may remain "milky or clouded" for an extended period of time.
- To avoid this, apply only thin coats and allow each coat to dry before applying the next coat.
- Sand lightly with fine sandpaper between coats of Premiere Clear.
- Woods containing high levels of tannic acid (such as redwood, cedar or red oak) may cause discoloration in the clear film. Always test before applying on an entire project.
For best performance, allow the coating to fully cure before exposing the surface to weather, handling or prolonged sunlight.
When to use Premier Clear vs Clear Acrylic
Rosco offers multiple clear coat options depending on the level of durability required.
| Product | Best For | Typical Use |
|---|---|---|
| Clear Acrylic (Flat / Gloss) | Standard scenic sealing | Ceilings, high walls and scenic surfaces with minimal handling |
| Premier Clear Satin | Higher durability and balanced sheen | Murals, installations and scenic surfaces likely to be touched |
The Clear Acrylic range does not include a satin option, but you can choose between:
Safety & Handling
Use only with adequate ventilation. Prevent build up of vapors by opening all windows and doors to achieve cross ventilation.
Do not breathe dust, vapors, or spray mist. Ensure fresh air entry during application and drying.
If you experience eye watering, headache, or dizziness or if air monitoring demonstrates vapor or mist levels are above applicable limits, wear an appropriate properly fitted respirator (NIOSH approved) during and after application.
Do not get in eyes, on skin or clothing. Wash thoroughly after handling.
Cautions & Disclaimer
- Always test on a small sample before full application.
- Allow adequate drying time between coats.
- While Premier Clear is formulated with UV stabilisers to help resist yellowing, long-term performance may vary depending on environmental exposure and application conditions.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for results obtained or damage incurred from use since method of application and use are beyond our control.
