⚠ Aerosol – shipping restrictions
Cannot be shipped to PO Boxes, Parcel Lockers, Tasmania, the Northern Territory or some other locations. Courier restrictions apply.
Kenair Compressed Air Refill — 360 ml replacement can
The replacement can for your Kenair duster. Supplied without a valve — fit the actuator valve from your Master Kit for the same powerful, controllable 65 psi jet.
Keep the valve, replace the can
A cost-effective, lower-waste way to keep your Kenair duster going. Screw your existing actuator valve onto the new can and carry on.
- Powerful, controllable jet of air
- Blows away dust, fluff, lint and grit
- Reaches into gaps, vents and cavities
- No-contact cleaning — nothing touches the surface
- Ultra-low GWP, ozone-friendly propellant
- Reusable valve — just replace the can
Camera, electronics and workshop
Camera & video gear
Clear dust from camera bodies, lens barrels, rigs, cases and accessories (not sensors, mirrors or high-grade optics).
Computers & electronics
Blow dust out of keyboards, vents, ports and control surfaces.
Lighting & control desks
Clear dust from fixtures, fans and console faders and buttons (equipment switched off).
Workshop & maintenance
Clean grit and debris from small parts, tools and mechanisms.
Hobby & model work
Dust-free finishing on models and small assemblies.
Before contact cleaning
Remove loose dust before using a contact cleaner.
What it is — and what it isn’t
Use it for
- Refilling an existing Kenair Master Kit
- Camera bodies, cases and accessories
- Electronics, vents, ports and control surfaces
- Workshop parts and mechanisms
Don’t use it for
- Use without a Kenair actuator valve — buy the Master Kit or a valve separately
- Digital camera sensors, camera mirrors, coated surfaces or high-grade optics
- Using the can upside down — liquid propellant can be released
- Near flames, sparks, live electrics or hot equipment — it’s a flammable aerosol
- Spraying at skin — liquefied gas can cause cold burns
Getting the best result
- Fit your Kenair actuator valve to the new can.
- Keep the can upright — never invert it while spraying.
- Use at room temperature (15–25°C is best; it works poorly below about 5°C).
- Switch off and cool down equipment first.
- Use short, controlled bursts from a short distance, working dust out and away.
- Let the can rest between long bursts — it cools as it’s used.
Key details
| Brand | Kenair (Kenro, UK) |
|---|---|
| Product code | KENR02 |
| Contents | 360 ml can (no valve) |
| Requires | Kenair Actuator Valve (in Master Kit or sold separately) |
| Can pressure | 65 psi (4.5 bar) at room temperature |
| Propellant | Ultra-low GWP, ozone friendly |
| Classification | Extremely flammable aerosol |
Common questions
Does the refill include a valve?
No. It’s the can only. Use the valve from your Kenair Master Kit, or buy a Kenair Actuator Valve separately.
Is this safe for camera sensors?
No. Kenro advises against using Kenair on digital sensors, camera mirrors, coated surfaces or high-grade optics.
Is it flammable?
Yes — it’s classed as an extremely flammable aerosol. Keep it away from heat, flames and live electrics.
How do I get the best performance?
Keep the can upright, use it at room temperature and spray in short bursts.
Always read the label and Safety Data Sheet (SDS) before use. Extremely flammable aerosol — use with good ventilation, keep away from heat, sparks and flames, keep below 50°C and never pierce or burn the can, even when empty. Test on a small hidden area first. Information is from Kenro product data and is a guide only.
Need help choosing?
Tell us what you’re working on and we’ll point you to the right product for the job.
