Rosco DigiComp HD Green (5751) — Digital Green Screen
DigiComp® HD · Digital Green (5751)
DigiComp HD Green — precision green for compositing
The digital green standard for virtual production and VFX. DigiComp HD Green (5751) is dialled to exact luminance and RGB targets with highly-specific spectral reflectance, so keyers separate foreground and background crisply — with little to no post clean-up.
Is green your key?
When digital green is the right key
The default precision key for compositing pipelines.
Virtual production & VFX
Where the key feeds a compositing pipeline and has to be clean at scale.
Little green in shot
Standard rule still applies — green foregrounds push you to blue.
Efficient lighting
High-gain reflectivity returns more keyable signal for the light you put in.
Problems it solves
The compositing problems it solves
Why VFX pipelines specify DigiComp rather than a generic green.
Dirty keys, endless roto
Spectral interference in generic mixes muddies separation.
Colour not to standard
Off-standard colour undermines compositing tools.
Over-lighting the screen
Low reflectivity forces more light.
Inconsistent across a volume
Big stages read as different greens.
At a glance
DigiComp HD Green (5751) — specifications
| Product | Rosco DigiComp HD Green · 5751 |
|---|---|
| Finish | Ultra-flat, zero sheen |
| Type | Water-based vinyl acrylic |
| Coverage | ~27 m² per 3.8 L per coat (~300 sq ft/gal) |
| Coats | Two over primer |
| Dry time | ~30 min – 1 hr |
| Colour standard | Luminance & RGB compositing ideals |
| Sizes | 3.8 L · 19 L |
| Pairs with | DigiComp keying tape |
Figures per Rosco published data; coverage varies with surface, porosity and method. Full SDS on the Rosco AU product page.
Application
Lay it down right
Precision colour still needs an even, matte wall. Prime, two coats, light it flat, and verify on a scope.
Prep the surface
Clean, dry, oil-free. Fill and sand — even light reveals every defect.
Prime porous areas
Roll Tough Prime White for a uniform base so colour lays even across a big wall.
Stir, don't shake
Stir until uniform. Use straight from the tin; thin only minimally if at all.
Two even coats
Brush, roller or spray. Keep a wet edge and overlap strokes. Two coats over primer.
Recoat, then cure
Touch-dry in ~30 min, recoat in 1–2 hr, so both coats go on in a day.
Light it evenly & test
Even wash, no shiny props or floor spill — then check the key on your camera.
How much will you need?
Coverage calculator
Based on ~27 m² per 3.8 L tin per coat. Two coats over primer is the sensible starting point. Add ~10% for touch-ups and test patches.
Enter your area
We'll estimate the litres and tins you need.
Estimate only. For a curved cyc, measure width × the full height up and over the curve. Send us the numbers and we'll check it with you.
Buy or sample
Get DigiComp HD Green (5751)
Order online, or talk to us about a sample and a full-volume quote.
Speccing a green VP volume?
Send your stage size and pipeline and we'll size it and quote it.