Rosco Fluorescent UV Paint — Orange (5781)
A water-based, UV-reactive scenic paint that reads as a bright orange in normal light and glows vivid orange under UV (black light). Same vinyl acrylic binder as Rosco Off Broadway, for theatre, events, film and display work.
Image: Rosco
Colour that switches on under UV
Rosco Fluorescent Orange is brighter than a normal orange in ordinary light and fluoresces vividly under ultraviolet light — useful for warm accents, highlights and signage in black-light scenes.
- Glows vividly under UV (black light)
- Brighter than normal colours in ordinary light
- Water-based vinyl acrylic binder (same as Off Broadway)
- Flat / matte finish
- Intermixes with other Rosco scenic paints
- Soap and water clean-up
Black-light effects for stage, screen and events
Black-light theatre & dance
Scenery, props and costume pieces that come alive when the stage is lit only with UV.
Events & immersive spaces
UV-reactive murals, signage and décor for themed events, clubs and activations.
Film, TV & music video
In-camera UV effects on sets and props lit with black light.
Scare attractions & exhibits
Reveals, glowing details and wayfinding in dark rides and exhibits.
Boosting scenic colour
Mix into other Rosco scenic paints to make normal colours more vibrant.
Retail & display
Eye-catching UV-lit display pieces and window features.
What it is — and what it isn’t
Use it for
- Scenery, flats, props and set pieces lit with UV
- Primed wood, wallboard and other prepared porous surfaces
- Fabric and soft goods (test first)
- Mixing into Rosco scenic paints for extra vibrancy
Don’t use it for
- Long-term exterior or sunlit use — fluorescent pigments fade with prolonged UV exposure
- Heavy dilution — water reduces hide and can reduce glow
- Expecting a glow with no UV source — it fluoresces, it does not glow in the dark
- Application below 10°C or on dirty, greasy surfaces
Getting the best result
- Make sure the surface is clean, dry and free of dirt and grease. Prime porous surfaces with Rosco Tough Prime — Tough Prime White is our recommended primer for canvas and muslin.
- For the most dramatic colour, paint over a white base coat.
- Stir well (don’t shake). Use straight from the can — add water only if needed, as it reduces hide and glow.
- Apply thin, even coats by brush, roller or spray gun, overlapping strokes and keeping a wet edge.
- Allow 30–45 minutes to touch-dry and 1–2 hours before recoating (at 24°C). Check the result under your actual UV source.
- Clean tools with soap and water.
Key details
| Product | Rosco Fluorescent Paint — Orange |
|---|---|
| Colour code | 5781 |
| In normal light | Bright, saturated orange |
| Under UV (black light) | Glows vivid orange |
| Binder / solvent | Vinyl acrylic / water |
| Finish | Flat / matte |
| Coverage (approx.) | 200–300 sq ft per gallon (≈ 19–28 m² per 3.79 L) — a guide only; fluorescent colours are more transparent and usually need extra coats or a white base |
| Dry time (24°C) | Touch 30–45 min; recoat 1–2 hours |
| Clean-up | Soap and water |
| Sizes | As listed above |
Common questions
What does Fluorescent Orange 5781 look like under UV?
It glows a vivid orange under ultraviolet (black) light. In normal light it reads as a bright, saturated orange. Always check under your own UV fixtures, as output varies between sources.
Do Rosco Fluorescent paints glow in the dark?
No. They fluoresce — they glow while lit by an ultraviolet (black light) source and stop when the UV is switched off. They are not phosphorescent glow-in-the-dark paints.
Do I need a primer or base coat?
Prime porous surfaces with Rosco Tough Prime (Tough Prime White is our recommended primer for canvas and muslin). Rosco recommends a white base coat for the most dramatic colour effects.
Can I thin it with water?
You can, but Rosco notes that water reduces hiding power and may reduce the brightness of the glow. Use it straight from the can where possible.
Will it fade?
Fluorescent pigments degrade with prolonged UV exposure, so avoid direct sunlight and long-term exterior use.
Always read the label and Safety Data Sheet (SDS) before use, and test on a sample of your actual surface first. Coverage is a guide only — it varies with the substrate and its porosity, the number of coats, any dilution and how the paint is applied. Information is from Rosco technical data and is a guide only.
Need help choosing?
Tell us what you’re working on and we’ll point you to the right product for the job.
🎨 UV / Fluorescent Paint Quick Guide
Rosco Fluorescent (UV reactive) paints are designed to look vivid under normal light and glow intensely under UV / blacklight. They’re used across theatre, haunted attractions, themed environments, dance and immersive installs where colour impact and UV reveals matter.
Why Rosco?
- Built for professional scenic work: consistent results across large surfaces and multiple coats.
- Stronger UV read: designed to “pop” under blacklight in entertainment environments.
- Works as a system: integrates cleanly with Rosco primers and scenic paint workflows.
- Trusted worldwide: widely specified for theatre, education, film/TV and themed builds.
Fast tips (avoid disappointment)
- For maximum glow, apply over a bright white base coat.
- Apply thin, uniform coats — the glow is more even and predictable.
- UV output depends on fixture strength + distance — test early with your actual lights.
Product features & technical details
Finish
Flat / Matte
Solvent
Water
Binder Type
Vinyl Acrylic
Film Thickness
2 mil. dry film
Dilution
Fluorescent Paints should be used straight out of the can. They can be diluted with water if necessary, however this will reduce the hiding power of the paint and may reduce the brightness of the “glow.”
Surface Preparation
Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces (except fabrics) using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster, then use Rosco Tough Prime as a final preparation. Use a white base coat to achieve the most dramatic colour effects.
Application
Stir contents well before use. Apply by brush, roller, or spray gun. Apply in thin uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge.
Coverage
Approximately 300 sq. ft. per gallon (≈ 28 m² per 3.79L), depending on application method, substrate and thickness of application.
Average Dry Time
At 75°F (24°C): Dries to the touch in 30–45 minutes. Can be recoated in 1–2 hours.
Clean-up
Soap and water.
Cautions & important notes
- UV longevity: Fluorescent pigments will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.
All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.
⭐ Popular: Invisible Blue (UV “Invisible Ink” Effect)
Many people searching for UV paint are specifically after an “invisible ink” style reveal. Invisible Blue is a milky white paint that fluoresces to a pale blue under blacklight. When painted over light coloured surfaces, Invisible Blue is often difficult to detect. However, it can be seen when painted over dark or black colours.
Tip: If your goal is maximum “invisible” in work light, test on your exact substrate and base coat before committing to the full build.
