Skip to product information
1 of 1

CRC 5037 White Lithium Grease 300g Aerosol

CRC 5037 White Lithium Grease 300g Aerosol

Regular price $30.00 NZD
Regular price Sale price $30.00 NZD
Sale Contact us to order
Taxes included. Shipping calculated at checkout.
New Zealand customers
We’re currently taking enquiries for this product in New Zealand — please leave your details and we’ll assist with your order. Pricing shown is indicative only.




View full details

⚠ Aerosol – shipping restrictions

Cannot be shipped to PO Boxes, Parcel Lockers, Tasmania, the Northern Territory or some other locations. Courier restrictions apply.

CRC · spray grease — 300 g aerosol

CRC White Lithium Grease (5037) — long-life spray grease

A lithium-based grease in a spray can. It goes on easily and leaves a tough, off-white film that resists heat and water, with rust and oxidation inhibitors to protect metal parts that slide, turn and hinge.

Lithium grease filmResists heat & waterRust & oxidation inhibitors−17.8°C to 149°C
CRC 5037 White Lithium Grease 300g aerosol can
What it does

Grease where a spray can reach

CRC 5037 gives you the lasting protection of a grease with the reach of an aerosol — ideal for metal-to-metal contact that a light oil won’t last on.

  • Long grease life for light-duty lubrication
  • Tough, high-viscosity film
  • Resists heat and water wash-off
  • Rust and oxidation inhibitors protect metal
  • Off-white colour shows where it’s been applied
  • Sprays into hard-to-reach spots
Where it’s used

Hinges, tracks and moving hardware

Hinges & latches

Long-lasting lubrication for door, flat and road-case hinges and latches.

Tracks & guide rails

CRC lists overhead door tracks, guide rails and slide conveyors — the same idea applies to sliding scenery hardware.

Chains, gears & cables

Open gears, chains, cables and cams that need grease rather than oil.

Bearings

Break-in lubrication for bearings, per CRC’s recommendations.

Corrosion protection

General protection for exposed metal parts in storage or damp conditions.

Workshop machinery

Pistons, cams and moving parts on light workshop equipment.

Right job, wrong job

What it is — and what it isn’t

Use it for

  • Metal-to-metal contact: hinges, latches, tracks, rails
  • Open gears, chains, cables and cams
  • Light-duty applications needing long grease life
  • Protecting metal from rust and moisture

Don’t use it for

  • Live (energised) electrical equipment
  • Mixing with greases of a different base — clean old grease out first
  • Heavy-duty or high-load bearings beyond light duty
  • Places where an off-white grease mark would be visible on set
How to use

Getting the best result

  1. Shake the can well before use.
  2. Clean off old or incompatible grease with a solvent first — don’t mix grease types.
  3. Spray a light, even coat onto the moving parts.
  4. Work the part through its movement to spread the grease.
  5. Wipe away excess to avoid collecting dust.
Specifications

Key details

Official name CRC White Lithium Grease
Product code 5037
Size 300 g aerosol
Operating temperature −17.8°C to 149°C
Drop point 177°C
Colour Off-white
Duty Light duty, long grease life
Propellant Hydrocarbon — flammable aerosol
FAQs

Common questions

What is white lithium grease used for?

For lubricating and protecting metal parts that slide, hinge or turn — hinges, latches, tracks, guide rails, chains, cables and open gears — where you need a grease that lasts longer than a spray oil.

Is CRC 5037 waterproof?

It forms a film that resists water and heat, and contains rust inhibitors. It’s water-resistant protection, not a sealant.

Can I use it on plastic?

CRC positions it for metal parts. For rubber, plastic and nylon, CRC 2094 silicone is the better choice.

White lithium grease vs 5-56?

5-56 is a thin penetrant that frees and protects. 5037 is a grease that stays put on moving metal parts for longer.

Can I mix it with other grease?

No. CRC advises against mixing greases of different base types. Clean out the old grease with a solvent before applying.

Always read the product label and Safety Data Sheet (SDS) before use. Flammable aerosol unless stated; use with good ventilation, keep away from ignition sources and never use on live (energised) equipment. Test on a small hidden area first — results depend on the surface, conditions and application. Specifications are from CRC technical data and are a guide only.

Need help choosing?

Tell us what you’re working on and we’ll point you to the right product for the job.

Creative Film & Theatre Solutions · Sydney, Australia · sales@cfats.com.au · 02 9906 6262